How to configure IP address for Ethernet port printers

I.Make configuration directly by test tools software:
1.Printing Self-test to check the printer’s own IP address (factory default IP: 192.168.123.100); self-test
method: turn off the printer, then turn on the printer while holding down the FEED button, 2or 3 seconds
later, release the FEED button and a page with the title “ self test” will be printed out as shown by the
picture below:

2.Confirm the printer IP address and then connect the printer to a computer through a hub, switch or cable
directly (direct interconnection method). (Note: the IP address may not be modified if the connection is
established through a router) Change the IP address by the test tool software in the CD, the software is as
follows:

How to configure IP address for Ethernet port printers | Varian ME